Warmwire Heated Floor Jun 07, 2016

I installed a WarmWire heated floor in a 6'x8' coat room that had no other source of heat. It is on a concrete slab with 2 outside walls and a wall to an unheated attached garage. I glued 2 6mm thick sheets of Cerazorb synthetic cork directly on the concrete. It was super easy to lay the wire on top on the cork using the metal clip system provided. To be safe, I laid a sheet of 1/4" luan plywood on top of the wires while laying the tile. I checked the resistance in the wires at each step... more

Great Product Dec 14, 2016

If you have electric baseboard heat and are looking for a premium product this seems to be pretty much the only game in town. It looks about as good as a baseboard heater can do and exudes quality. The thing weighs about ten times a regular heater of similar size so holds heat much better - though ultimately you are buying this for looks not performance. Whether you can justify spending this much is a personal choice but if you have heaters in a highly visible space and have a room that... more

Owner, Custom Made Jun 10, 2016

I replaced a Dunkirk XEB-3 (20 yrs. old) with the Dunkirk boiler above. The new one is all most identical to the old one, that is the pipes were located same as the old, so gas and water lines were easily plumbed. The old electrical wires could be used although lengthened to connect to the digital controls. The circulators location has changed, it's still provided with its wiring provided. Venting is the same as the old one. I was happy to get another Dunkirk that installed easily.

Flawless Aug 12, 2016

Just set the thermostat and it runs like a top, and it resets automatically. What else do you need?

Daikin Mxs Wall Mounted 2-zone System - 24,000 Btu Outdoor - 15k + 15k Indoor - 18.9 Seer Review Aug 17, 2016

I have one of these and am a bit disappointed when it's efficiency drastically decreases when the outside temperature drops below -10C or + 24F. Still I am very pleased with it. Now the inside unit 'chirps', what is up with that ? Does it need to be oiled ? Doug